ADC_Error Namespace Reference

Handle ADC errors. More...

Enumerations
enum	ADC_ERROR : uint16_t {   ADC_ERROR::OTHER = 1 << 0, ADC_ERROR::CALIB = 1 << 1, ADC_ERROR::WRONG_PIN, ADC_ERROR::ANALOG_READ = 1 << 3,   ADC_ERROR::ANALOG_DIFF_READ, ADC_ERROR::CONT = 1 << 5, ADC_ERROR::CONT_DIFF = 1 << 6, ADC_ERROR::COMPARISON = 1 << 7,   ADC_ERROR::WRONG_ADC = 1 << 8, ADC_ERROR::SYNCH = 1 << 9, ADC_ERROR::CLEAR = 0 }
	ADC errors. Each board has a adc->adX->fail_flag. Include ADC_util.h and use getStringADCError to print the errors (if any) in a human-readable form. Use adc->adX->resetError() to reset them. More...

Detailed Description

Handle ADC errors.

Enumeration Type Documentation

ADC_ERROR

enum ADC_Error::ADC_ERROR : uint16_t

strong

ADC errors. Each board has a adc->adX->fail_flag. Include ADC_util.h and use getStringADCError to print the errors (if any) in a human-readable form. Use adc->adX->resetError() to reset them.

Enumerator
OTHER	Other error not considered below.
CALIB	Calibration error.
WRONG_PIN	A pin was selected that cannot be read by this ADC module.
ANALOG_READ	Error inside the analogRead method.
ANALOG_DIFF_READ	Error inside the analogReadDifferential method.
CONT	Continuous single-ended measurement error.
CONT_DIFF	Continuous differential measurement error.
COMPARISON	Error during the comparison.
WRONG_ADC	A non-existent ADC module was selected.
SYNCH	Error during a synchronized measurement.
CLEAR	No error.

Definition at line 661 of file settings_defines.h.