ADC  9.2
Analog to Digital Conversor library for the Teensy 4 microprocessor
ADC_Module Member List

This is the complete list of members for ADC_Module, including all inherited members.

adc_configADC_Module
ADC_Module(uint8_t ADC_number, const uint8_t *const a_channel2sc1a, ADC_REGS_t &a_adc_regs)ADC_Module
ADC_numADC_Module
adcWasInUseADC_Module
analogRead(uint8_t pin)ADC_Module
analogRead(ADC_INTERNAL_SOURCE pin)ADC_Moduleinline
analogReadContinuous()ADC_Moduleinline
calibrate()ADC_Module
checkDifferentialPins(uint8_t pinP, uint8_t pinN)ADC_Module
checkPin(uint8_t pin)ADC_Module
continuousMode()ADC_Moduleinline
disableCompare()ADC_Module
disableDMA()ADC_Module
disableInterrupts()ADC_Module
enableCompare(int16_t compValue, bool greaterThan)ADC_Module
enableCompareRange(int16_t lowerLimit, int16_t upperLimit, bool insideRange, bool inclusive)ADC_Module
enableDMA()ADC_Module
enableInterrupts(void(*isr)(void), uint8_t priority=255)ADC_Module
fail_flagADC_Module
getMaxValue()ADC_Module
getQuadTimerFrequency()ADC_Module
getResolution()ADC_Module
getTimerFrequency()ADC_Moduleinline
isComplete()ADC_Moduleinline
isContinuous()ADC_Moduleinline
isConverting()ADC_Moduleinline
loadConfig(const ADC_Config *config)ADC_Moduleinline
num_measurementsADC_Module
readSingle()ADC_Moduleinline
recalibrate()ADC_Module
resetError()ADC_Moduleinline
saveConfig(ADC_Config *config)ADC_Moduleinline
setAveraging(uint8_t num)ADC_Module
setConversionSpeed(ADC_CONVERSION_SPEED speed)ADC_Module
setHardwareTrigger()ADC_Moduleinline
setReference(ADC_REFERENCE ref_type)ADC_Module
setResolution(uint8_t bits)ADC_Module
setSamplingSpeed(ADC_SAMPLING_SPEED speed)ADC_Module
setSoftwareTrigger()ADC_Moduleinline
singleEndedMode()ADC_Moduleinline
singleMode()ADC_Moduleinline
startContinuous(uint8_t pin)ADC_Module
startQuadTimer(uint32_t freq)ADC_Module
startReadFast(uint8_t pin)ADC_Module
startSingleRead(uint8_t pin)ADC_Module
startTimer(uint32_t freq)ADC_Moduleinline
stopContinuous()ADC_Module
stopQuadTimer()ADC_Module
stopTimer()ADC_Moduleinline
wait_for_cal()ADC_Module